•Volute casing in steel sheet, protected againstatmospheric agents by epoxy paint.
• Single inlet, single width, forward curved impeller (sirocco type), in galvanized steel sheet.
• Execution 5 (with impeller directly coupled to flanged motor)
• Standard orientation LG270°.
• Motorizations:
- DIC: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, B35 shape. DIC 100 T and M with motor shape B14, IP44, class B.
- DIC-ATX: asynchronous three-phase motors or single-phase II2G,II2D,II2GD according to international standards IEC 60034, IEC 60072, IEC 60079 and/or IEC61241, EMC 2004/108/CE, LVD 2006/95/CE, with Atex certification, CE marked, IP55/IP 65, class F, B35 shape.
- All motors suitable to S1 service (continuous working at constant load).

The centrifugal fans of the DIC series are designed to convey clean and not-dusty air and smoke, up to a maximum temperature of 80°C. They are suitable for all the industrial applications where small air volumes and high pressures are required. The series consists of different models with impeller diameter from 100 to 180 mm. The motor is directly fitted to the forward curved impeller. The casing is easily adjustable, also on site, to the required discharge angle every 45°, including 180° and 225° position.

INSTALLATION
The centrifugal fans with forward curved impellers must always be installed to ducted systems, eventually with the use of additional resistance (for example setting shutters), that can limit the air flow in such a way that the absorbed current is within the acceptable values stated on the motor rating label.

VERSIONS
• DIC 100 with asynchronous three-phase or single- phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, B35 shape (DIC 100 MEC).
• Rotation RD upon request.
• Corrosion resistance version, with casing, flanges and impeller in stainless steel AISI 304 (DIC INOX)
• Version suitable to convey hot gases, up to 150°C maximum (DIC-AT).
• 2 ATEX versions: DIC (steel sheet) and DIC INOX ATEX (in stainless steel Aisi 304).See ATEX range.